Balboa Control Systems (Kit)-
Electronic: Balboa BP7 System. Digital Spa Controller /Spa Pack / Replacement Spa Control System with Heater, Top Side Control & Sensors. Can be wired for 240 V 4 wire Operates 2 speed Pump 1, 1 Speed Pump 2 or Blower, Ozone Generator, Light, Circulation Pump. Comes without Appliance cords except for Light cord. Utilizes Amp connectors.
A system built for the aftermarket.. With 7 relays, the BP7 has 32 different setups and can power a spa with 1-4 pumps, including Microsilk systems. Can also replace any Balboa BP System* while using the existing topside that is already installed on the spa. Will replace any Balboa VS or EL System* when you match it with any TP or SpaTouch topside panel. Will replace any Balboa or other brand’s non-low flow system* when you match it with any TP or SpaTouch topside panel. This system can only be used at 220v.
Replaces VS300, VS500Z, VS501Z, VS501SZ, VS503SZ, VS504SZ, VS510SZ, VS510DZ, VS511Z, VS511SZ, VS513Z, VS514SZ, VS515Z, VS515SZ, VS520Z, VS520SZ, VS520DZ, VS525Z
Mfg - Balboa Water Group
Note -
Kit Includes:
G4361 - Balboa BP7 System with 4.0kW Heater
55676-09 - Balboa TP600 Panel, Less Overlay cct004
12762 - TP600 Panel Overlay (6-Button, Oval)
25098 - Wire Assembly, 8ft for spa light
15380 - Panel Bezel (Adapter Plate 9" x 4")
Control System Brand: Balboa Water Group
Control System Series: BP7 aftermarket series
Input Voltage to Control System: 240VAC (4) wire.
Heater Rating: 4.0Kw at 240VAC Input.
Control System Operates:
Pump 1: 2 Spd 120VAC or 240VAC (Circuit board allows convertible voltage output to the Pump 1 connection)
Pump 2 or Blower: 1 Spd 120VAC or 240VAC (Circuit board allows convertible voltage output to the Pump 2 or Blower connection)
Circ Pump (Optional): 1 Spd 120VAC or 240VAC (Circuit board allows convertible voltage output to the Circ Pump connection)
Light: 12VAC
Ozone: 1 Spd 120VAC or 240VAC (Circuit board allows convertible voltage output to the Ozonator connection)
Aux:
Heater Plumbing Size (before Tailpieces): 2"FBT (3 1/16"ID)
Heater Plumbing Size (after Tailpieces): 2"S (2 3/8""ID). Tailpieces are included.
Also found as PN -
G6406 Control System Kit, Balboa BP7, 230V Only, 4.0kW, 3 Pumps w/TP600 Topside & Light Cord. Balboa BP7 Control System Bundle
G6406 58-138-3260 Control, Balboa Water Group Retrofit Kit, BP7, TP600 Replaces: 389173
Replaces Tropical Seas Control by Balboa 56763-01
Replaces MAAX Spas 110237
Replaces Vita Spa 110236
ACT G6406 Control System, Balboa, BP7,w/ TP600 Topside Includes Spaside Adapter Plate & Light Cord Only Pumps and Blower Cords Separately
HOR G6406 58-138-3260 , BWG, BP7, TP600 Kit includes: system, panel, panel adapter plate, light cord and overlay
HYQ 50-BP7-600-40-K G6406 Balboa BP7, 4.0Kw, w/TP600 Spaside, 3 Circuits
